6 pk 20oz Blank Sublimation Skinny Straight Tumbler (non-tapered) Bundle

Our Sublimation Straight Skinny Tumblers non-tapered are great for sublimating on. Each tumbler comes with a lid, plastic straw, and box. These tumblers are made with durable stainless steel that will withstand cold beverages, as well as prolonged exposure to heat and water, ensuring a lasting imprint.

Material: metal

Bundle Includes:

• 6pk 20 Oz Tumblers

• 6 Shrink Wrap

• 6 Care Cards

• 1 roll of tape

How to Sublimate Tumblers:

Pre-Heat your sublimation convection oven to 355f

1. Print your Sublimation Transfer
2. Clean your tumbler
3. Apply your sublimation design and tape using your heat tape
4. Grab your shrink wrap and place the tumbler inside. Use a heat gun or a hair dryer to shrink the tube tightly around the tumbler. Make sure you get the top and bottom areas well.
5. Place your tumbler in the center of the oven and set your timer for two minutes. At two minutes, you want to rotate your tumbler 1/4 of a turn. Using your Heat Resistance Gloves.
6. After turning the tumbler set your time for another two minutes and rotate your tumbler 1/4 turn again. Once again using your Heat Resistance Gloves.
7. Repeat at least one more time. Most tumblers will be done in the 6-8 minute range. After the tumbler has been in the oven six minutes, watch it closely.

8. You’ll first notice that the watermarks from your sublimation start showing through. This means your tumbler is almost done. You’ll know is all the way done when you start to see your design show through the paper.

9. Remove your tumbler from the oven. Set aside and allow to cool completely. (approximately 10 minutes) When the tumbler is cooled, begin removing the shrink-wrap and sublimation paper. Enjoy your beautiful new tumbler!
   

Please Note: *all sales are final and therefore the product may not be returned for a refund!